Using your Wet to Dry Straightener with Ionic Technology
•Before you start to style your hair, comb through so that there are no tangles.
•For best results, towel dry hair. Do not use on dripping wet hair.
•Plug in to a suitable supply and switch on. The top neon green light will come on. This is the hottest setting at 200 degrees.
•There is no need to pre heat the styler. The styler will get very hot very quickly so do not touch with your fingers.
•Apply a styling lotion. We recommend PPS professional products.
•Beginning at the back, use clips to section the hair. Take a section
approximately 5cms wide and comb or brush it through. Working from root to the ends, place the section between the plates and squeeze the handle shut. Be careful not to touch your skin.
•Hold the styler in place for 3 to 5 seconds depending on your hair type (3 seconds for fine hair and up to 5 seconds for thicker hair).
•Once the hair is heated, carefully slide the styler along the direction of separated hair making sure that the hair is heated and straightened all the way to the ends.
6