Using your Wet to Dry Straightener with Ionic Technology continued
•Select another section of hair and repeat the process until all the hair has been straightened.
•Finish with a few drops of D Frizz Smootheez Serum from PPS.
•Switch off the appliance and remove the plug from the power outlet. Allow to cool completely before storing.
•Please note that your styler can be used on dry hair.
Changing the temperature settings
•When you plug in and switch on, the styler will automatically set at the hottest setting of 200 degrees (setting 4).
•If you wish to use a lower setting, push the temperature control switch.
This will reduce the temperature to 175 degrees (setting 3).
•Pushing the switch again will reduce the temperature to 150 degrees (setting 2).
•Pushing the switch again will reduce the temperature further to 130 degrees (setting 1).
•Pushing the switch again will turn the unit off.
•To increase the temperature, switch the unit back on.
•Allow 30 seconds for each setting to reach the correct temperature.
•We recommend that you do not use a higher temperature than necessary to straighten your hair. Start on a lower setting and move up if required.
Note: You may hear a hissing 7