Panasonic CU-S24NKUA, CS-S18NKUA, CS-S24NKUA, CU-S18NKUA manual Indoor Unit

Page 6

INDOOR UNIT

CAUTION

•Switch off the power at the circuit breaker before cleaning.

•Do not touch the aluminium fin, sharp parts may cause injury.

CLEANING INSTRUCTIONS

 

HINT

• Do not use benzene, thinner or scouring powder.

 

• To ensure optimal performance of the unit, cleaning

Use only soap ( pH7) or neutral household detergent.

 

maintenance has to be carried out at regular intervals.

Do not use water hotter than 104°F.

 

Dirty unit may cause malfunction and you may see error

 

 

 

code “H99”. Please consult authorized dealer.

2

4

 

1

 

7

8

9

 

3

5

6

1 INDOOR UNIT

7 AUTO OFF/ON BUTTON

6

• Wipe the unit gently with a soft, dry cloth.

2FRONT PANEL

Remove Front Panel

Raise and pull to remove the front panel.

Wash gently and dry.

Close Front Panel

Press down both ends of the front panel to close it securely.

3REMOTE CONTROL RECEIVER

4ALUMINIUM FIN

5HORIZONTAL AIRFLOW DIRECTION LOUVER

Do not adjust by hand.

6VERTICAL AIRFLOW DIRECTION LOUVER

Do not adjust by hand.

Use when remote control is misplaced or a malfunction occurs.

Step

Action

Mode

1

Press once.

Automatic

2

Press and hold until you hear

Force cooling

one beep, then release.

 

 

3

Repeat step 2. Press and hold

Normal cooling

until you hear two beeps, then

 

release.

 

Press the button to turn off.

8AIR PURIFYING FILTER

Vacuum the air purifying filter.

It is recommended to clean the filter every 6 months.

Replace the filter every 3 years or replace any damaged filter.

Part no.: CZ-SA20P

9 AIR FILTERS

Air filter cleaning is required every two weeks.

Wash/rinse the filters gently with water to avoid damage to the filter surface.

Dry the filters thoroughly under shade, away from fire or direct sunlight.

Replace any damaged filters.

Image 6
Contents English Quick GuideModel No Indoor Unit Outdoor Unit F568727Operation Condition Safety PrecautionsPower Supply Indoor Unit and Outdoor UnitRemote Control Remote Control To SET the Timer Not used in normal operationsIndoor Unit Symptom TroubleshootingFollowing symptoms do not indicate malfunction Unit stops and the Timer indicator blinksFor Seasonal Inspection After Extended NON-USE NON Serviceable CriteriasInformation For Extended NON-USEMemo Memo Memo OFF/ON Quick GuideMode Temp