English
Inhaling with the OMRON CompAIR CX pro Nebuliser
Before using the nebuliser, the nebuliser kit must be cleaned according to the cleaning and disinfection instruction within this manual. (see page 7)
1.Make sure that the filter compartment (air inlet) and air ventilation holes are not covered, otherwise the unit may become overheated.
2.Make sure that the power switch is set to the OFF (O) position and plug in the mains cable.
For steps 3 ~ 7, refer to the drawing below.
3.Remove the nebuliser cap from the medication tank by turning it counterclockwise and lifting it. Remove the mouthpiece.
4.Remove the vaporiser head.
5.Fill the medication tank with the prescribed amount and type of medication (max 6 ml).
6.Reinsert the vaporisation head.
7.Reconnect the nebuliser cap to the medication tank and fit the mouthpiece.
2
1 
6 5 
4 
3 
2 
1 
6 5 4 3 
2 
1 
Step 4
6 
5 
4 3 
2 
1 
Step 5
2
6 5 4 3 
2 
1 
1
Step 6
6 
5 
4 
3 
2 
1 
Step 3 | Step 7 |
5