ResMed S8 Elite II manual

Page 18

•If oxygen is used with this device, the oxygen flow must be turned off when the device is not operating.

If the oxygen has been left on, turn off the device, then wait 30 minutes before turning on the device again.

Explanation: When the PAP device is not in operation and the oxygen flow is left on, oxygen delivered into the air delivery tubing may accumulate within the PAP machine enclosure and create a risk of fire. This applies to most types of PAP machines.

•Oxygen supports combustion. Oxygen should not be used while you are smoking or in the presence of an open flame.

•Always ensure airflow is being generated by the device before the oxygen supply is turned on.

•Always turn the oxygen supply off before stopping the airflow from the device.

Note: At a fixed rate of supplemental oxygen flow, the inhaled oxygen concentration will vary, depending on where the oxygen is introduced, the pressure settings, patient breathing pattern, mask selection, and leak rate.

•Do not use the S8 Series II if there are obvious external defects or unexplained changes in performance.

•Do not open the S8 Series II case. There are no user serviceable parts inside. Repairs and internal servicing should only be performed by an authorised service agent.

•Explosion hazard—do not use in the vicinity of flammable anesthetics.

CAUTIONS

! • At low pressures, the flow through the exhalation ports of your mask may not clear all exhaled gas from the tubing. Some rebreathing may occur.

• The airflow for breathing produced by this device can be as much as 11ºF (6ºC) higher than the temperature of the room. Caution should be exercised if the room temperature is warmer than 90ºF (32ºC).

• When AC mains power (100–240V AC) is not available, always use a ResMed DC-12 converter. (The DC-12 converter is available as an optional accessory. It is not supplied with all models.)

Note: The above are general warnings and cautions. Specific warnings, cautions, and notes appear with the relevant instructions in the manual.

16

Page 17 Page 19
Image 18
Page 17 Page 19
Contents S8 Series Contents Introduction ContraindicationsAdverse Effects Parts of the S8 Series II system Masks Humidifiers ResScan Data CardUsing the S8 Series Setting UpHow to Use the Control Panel Selecting the Mask TypeUsing the Mask-fitting Feature Starting TreatmentChanging the Settings on your S8 II Device Stopping TreatmentStandard Menu Detailed Menu Cpap AutosetUsing the Data Card to Collect Data Messages on the S8 Series II LCDCopying Data onto the Data Card Weekly Cleaning and MaintenanceDaily MonthlyReplacing the Air Filter ServicingFrequently Asked Questions How will it feel when I am breathing with the S8 Series II?Troubleshooting No displayDisplays error message Check tube!! Key if done Technical Specifications Power SupplySymbols which appear on the device General Warnings and CautionsPage Limited Warranty

S8 Elite II specifications

The ResMed S8 Elite II is a continuous positive airway pressure (CPAP) device designed to provide effective treatment for obstructive sleep apnea (OSA). Renowned for its reliability and efficiency, this model brings together advanced features and user-friendly technology aimed at enhancing the quality of sleep for individuals suffering from this condition.

One of the most notable features of the S8 Elite II is its AutoSet technology, which ensures that the device adjusts the airflow pressure automatically. This allows for optimal treatment pressure during sleep, responding to the varying needs of the patient throughout the night. Consequently, patients experience a more comfortable and less intrusive therapy session as the device adapts to changes in their breathing patterns.

The S8 Elite II's Easy-Breathe technology is another standout characteristic. This innovative feature mimics the natural breathing pattern, providing a more comfortable experience during inhalation and exhalation. As a result, users report decreased air pressure discomfort, making it easier to acclimate to their CPAP therapy.

In terms of usability, the S8 Elite II is designed with simplicity in mind. The intuitive menu and adjustable settings allow users to personalize their therapy easily. The large LCD screen provides clear visual feedback and guidance, helping patients to make quick adjustments as needed. Additionally, it comes with an integrated SmartStart function, which begins therapy automatically when the mask is placed on, and pauses when it is removed. This seamless operation enhances the user experience and encourages consistent usage.

Portability is another significant advantage of the ResMed S8 Elite II. Its compact design allows for easy transportation, making it ideal for travel. Users appreciate its lightweight frame and sturdy carry bag, ensuring that essential sleep therapy is never compromised, even on the go.

Moreover, the device's data tracking capabilities enable patients and healthcare providers to monitor therapy effectiveness. The built-in data card stores nightly usage information, which can be accessed and analyzed during follow-up appointments to optimize treatment.

In summary, the ResMed S8 Elite II stands out in the field of sleep apnea therapy devices. Its advanced technologies, such as AutoSet and Easy-Breathe, make it a top choice for users seeking effective and comfortable treatment. With its user-friendly design, portability, and data tracking features, the S8 Elite II is equipped to enhance sleep quality and overall well-being for those living with obstructive sleep apnea.
Top Page Image Contents