BLADE LEVER
•The lever is conveniently located above the on/ off switch so it can easily be adjusted while the clipper is in your hand.
•The lever adds versatility to the clipper by allowing a gradual change to the length of a cut without an attachment comb.
•When the lever is in the uppermost position, the blades will give the closest cut leaving the hair very short. Pushing the lever gradually downward increases the cutting length.
•In its lowest position, the lever will leave the hair approximately the same length as a #1 comb.
•The lever will also extend the blade’s life
as a longer cut requires less work from the blades.
•While the clipper is running, move the Lever from “close cut” to “longer cut” a number of times. This will help keep cut hair away from the blades. If the clipper stops cutting, and the method above does not help, then the blades are blunt and need to be replaced.
Close cut
Longer cut
IMPORTANT SAFEGUARDS
When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:
To reduce the risk of death or injury by electric shock:
•Unplug this appliance before cleaning.
•Do not place or store the appliance where it can fall or be pulled into a bath or sink.
•Do not use while bathing or showering.
•Do not place in, or drop into, water or other liquid.
•Do not reach for an appliance that has fallen into water. Unplug immediately.
To reduce the risk of burn, electric shock, fire or injury to persons:
•Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
•This appliance should never be left unattended when plugged in.
•Close supervision is necessary when this appliance is used by, on, or near children or people with reduced physical, sensory or mental capabilities.
•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
•Children should be supervised to ensure that they do not play with the appliance.
•Never operate this appliance if it has a damaged cord or plug or if it has malfunctioned.
•Keep the cord away from rough, sharp or heated surfaces.
•Do not pull, twist, or wrap the cord around the appliance.
•Never drop or insert any object into any opening in this appliance.
•Before use, ensure that the blades are correctly aligned.
•Do not place the appliance on any surface while it is operating.
•Do not use this appliance with a damaged or broken comb nor with teeth missing from the blades as injury may occur.
INSTRUCTIONS FOR HAIR CUTTING
Before using clippers to cut hair:
1.Inspect the clipper, making sure that it is free of oil between the cutting blade teeth. Switch on the unit to distribute the oil and to ensure that it is running smoothly. Wipe off any excess oil. This should be done after each use. Unwind and straighten the cord during use in order to avoid tangling.
2.Ensure that the person that is going to have their hair cut is properly seated and that the hair to be cut is at eye level. This allows easy visibility while cutting and complete control of the clipper.
3.Before cutting hair, brush/comb the hair so that it is straight & tangle free.
4.Place a towel around the neck and shoulders of the person having the haircut.
REMINDERS
•Cut the hair in a relaxed and slow manner. Use short strokes and work gradually over the entire head.
•Always take off a little hair at a time; you can
20800_IM.indd 3
2013/03/05 10:32:08 AM