HOW TO TAKE A READING (Continued)
4. When the measurement is complete, the arm cuff completely deflates and your blood pressure and pulse rate are displayed.
NOTE:
The monitor automatically stores blood pressure and pulse rate into the memory.
• When 21 sets of readings are stored
in memory, the oldest set will be deleted to store a new set.
5.Press the ON/OFF button to turn the monitor off.
NOTE:
If you forget to turn the monitor off, it will automatically shut itself off after five minutes.
Instructions for special conditions:
•If your systolic pressure is known
to be more than 220 mmHg, press and hold the START button until the monitor inflates 30 to 40 mmHg higher than your suspected systolic pressure.
START
NOTE:
Do not apply more pressure than necessary.
The monitor will not inflate above 280 mmHg.
Continue to press button
13