HOW TO TAKE A READING
If you are going to use the unit’s memory function to automatically store the measurement values, you need to choose user A or B on the User Selector before starting a measurement.
1. Press the ON/OFF button.
a) All display symbols appear for approximately one second.
b) When the monitor becomes ready to measure, the Heart Symbol (
) appears on the display.
2.Press the START button and remain still.
As the cuff begins to inflate, the monitor automatically determines your ideal inflation level. Because this monitor detects the pulse even during inflation, do not move your arm and remain still until the entire measurement completes.
•If you want to stop the inflation or measurement, press the ON/OFF button. The monitor will stop inflating and start deflating rapidly, and the monitor
will turn off.
3.Inflation stops automatically and measurement is started.
As the cuff slowly deflates, decreasing |
|
numbers appear on the display and the |
|
Heart Symbol ( ) flashes at every | Inflation |
heartbeat. In rare circumstances, a higher |
|
inflation may be necessary. In those |
|
cases, the monitor reinflates the cuff up |
|
to 30 mmHg higher than initial inflation |
|
and restarts the measurement. |
|
USER
Deflation
12