TO TURN ON OR OFF THE UNIT
•Please be aware of the OFF indication on the remote control display to prevent the unit from starting/ stopping improperly.
TO SET TEMPERATURE
•Selection range : 16°C ~ 30°C.
•Operating the unit within the recommended temperature could induce energy saving. COOL mode : 26˚C ~ 28˚C.
DRY mode : 1˚C ~ 2˚C lower than room temperature.
TO SELECT OPERATION MODE
AUTO mode - For your convenience
•Unit selects the operation mode according to the room temperature.
COOL mode - To enjoy cool air
DRY mode - To dehumidify the environment
•Unit operates at low fan speed to give a gentle cooling operation.
TO SELECT FAN SPEED (3 OPTIONS)
TO SET THE TIMER
• To turn ON or OFF the unit at a preset time.
Select ON or | Set the time. | Confirm. |
OFF timer. |
|
|
|
|
|
•To cancel ON or OFF timer, press 
or 
then
press 
.
•When ON Timer is set, the unit may start earlier (up to 15 minutes) before the actual set time in order to achieve the desired temperature on time.
•Timer operation is based on the clock set in the remote control and repeats daily once set. For clock setting, please refer to Remote Control Preparation at back cover.
•If timer is cancelled manually or due to power failure, you can restore the previous setting (once power is
resumed) by pressing 
.
OPTIONAL SETTINGS
ENGLISH
•For AUTO, the indoor fan speed is automatically adjusted according to the operation mode.
TO ADJUST VERTICAL AIRFLOW
DIRECTION (4 OPTIONS)
CLOCK
Press and hold for approximately 10 seconds to show temperature setting in °C or °F.
Press and hold for approximately 5 seconds to show
•Keeps the room ventilated.
•If AUTO is set, the louvers swing up/down automatically.
Press to restore the remote control’s default RESET setting.
Use curtains to screen off sunlight and outdoor heat to reduce power consumption during cool mode.
11