Panasonic CS-MKS9NKU appendix Rear Side Hole, To take out the remote controller, pull it forward

USING THE REMOTE CONTROLLER (CONTINUED)

How to Use the Remote When using the remote controller, always point the unit’s transmitter head directly Controller at the air conditioner’s receiver.

Air Conditioner (Indoor unit)

	Receiver
Remote Controller	(Transmitter head)

Remote Controller Installation The remote controller may be operated either from a non-fixed position or from a Position wall-mounted position. To ensure that the air conditioner operates correctly, do

not install the remote controller in the following places:

•In direct sunlight

•Behind a curtain or other places where it is covered

•More than 26 ft (8 m) away from the air conditioner

•In the path of the air conditioner’s airstream

•Where it may become extremely hot or cold

•Where it may be subject to electrical or magnetic noise

•Where there is an obstacle between the remote controller and air conditioner (since a check signal is sent from the remote controller every 5 minutes)

Mounting the Remote Before mounting the remote controller, press the ON/OFF operation button at the Controller mounting location to make sure that the air conditioner operates from that

location. The indoor unit should make a beeping sound to indicate that it has received the signal.

Remote Control

Holder

Mounting Screws

5/32 x 5/8" (4 x 16 mm)

(included)

Press

Set in place

Rear Side

Hole

•To prevent loss of the remote controller, you can connect the remote controller to the holder by passing a string through the remote controller and attachment hole.

	To take out the remote controller, pull it forward.
When Holding the Remote	• When using the remote controller and during air conditioner operation, the
Controller	transmitter on the remote controller should be pointed towards the receiver on
	the indoor unit.
	• Make sure that there are no objects between the remote controller and
	receiver which could block the signal.

11