Panasonic CS-MKS9NKU, CS-MKS7NKU Remote Controller, Advance button, Selector button, Transmitter

REMOTE CONTROLLER

Transmitter

Sensor

	Display		(Cover closed)
	QUIET button	ON/OFF operation button
		1 HR. TIMER button
		Temperature setting buttons (TEMP.)
		MODE selector button
FAN SPEED selector button		NIGHT SETBACK button
	FLAP button	HIGH POWER button
ON TIME	Advance button	Advance button	OFF TIME
setting			setting
	Return button	Return button
buttons			buttons
	CANCEL button	CLOCK button
	SENSOR button	Time display selector button
	ADDRESS switch	ACL button
		Temperature display
		selector button

NOTE

The illustration above pictures the remote controller after the cover has been opened.

Transmitter	When you press the buttons on the remote controller, the	mark appears in the
	display to transmit the setting changes to the receiver in the air conditioner.
Sensor	A temperature sensor inside the remote controller senses the room temperature.
Display	Information on the operating conditions is displayed while the remote controller is
	switched on. If the unit is turned off, FLAP setting and FAN SPEED setting are
	not displayed.
QUIET button	: When you press this button, the fan rotates slower than the fan speed
	setting to provide a quieter operating sound.
ON/OFF operation button	This button is for turning the air conditioner on and off.
1 HR. TIMER button	: When you press this button, regardless of whether the unit is operating or
(1-HOUR OFF TIMER)	stopping, the unit operates for one hour and then shuts down.

8