Omron Healthcare HEM-637 manual Advanced Positioning Sensor APS Setting

Page 10

Advanced Positioning Sensor (APS) Setting

Set the (APS) function to ON or OFF and set SIGNAL of the position sensor to ON (beeps) or OFF (does not beep).

1.Push the SET button while the power is turned off.

Keep pressing the SET button until the Position Sensor Screen is displayed.

2.Select ON or OFF.

•The Position Sensor is set to ON and the SIGNAL is set to ON (to beep) at the time of your purchase of the monitor.

For setting the Position Sensor to OFF

Push the button to set the Position Sensor to OFF.

Position Sensor Screen

Position Sensor OFF Screen

• To set it to ON after setting it OFF, push the button.

• There is no SIGNAL setting when the Position Sensor is set to OFF.

Position Sensor ON

and SIGNAL ON Screen

How to set the SIGNAL to OFF when the Position Sensor is set to ON

Push the SET button to make

SIGNAL ON flash.

To set the monitor to SIGNAL OFF, push the button.

3.Lock the setting.

Position Sensor ON and SIGNAL OFF Screen

If you are also going to change other settings, push the SET button to lock the setting.

•When you push the SET button, the display changes to Measurement Screen.

If you want to finish after locking the setting, push the START/STOP button to turn off the power.

10

Image 10

Contents Model HEM-637 Contents Introduction Know Your Unit IntelliSense Technology Is An Assurance of AccuracyGraph button Date/Time Display MarkSystolic Blood Pressure Display Pulse Display ButtonSuggestions Before Measuring Blood Pressure Battery Installation Battery Replacement Automatic Memory Setting Advanced Positioning Sensor APS Setting Push the button to set the Position Sensor to OFFWrist Selection Setting Alarm Setting Alarm Setting Date and Time Setting Date and Time Setting Reset Settings How to Reset This MonitorFor selecting YES How to Apply the Wrist Cuff How to wrap the wrist cuff correctly on left wristHow to Wrap the Wrist Cuff Fold and fasten the extra portion of wrist cuff as shownHow to Measure Blood Pressure Please be careful not to raise your wrist too highBe careful not to raise your wrist too high How to see the measurement results in enlarged characters How to Use The Memory Function Memory Reset Function How to Use the Graph Function To display the graphHow to see the graph For the people with hypertensionError Cause How to correct TroubleshootingOmron Healthcare Care and Maintenance FCC Caution Specifications HEM-637Limited Five Year Warranty Page Omron HEALTHCARE, INC