How to Use The Memory Function

This monitor has a memory function to store up to 90 measurement results. When you push the MEMORY button, the monitor displays the measured values together with the date and time.

For the 91st measurement and onward, the measured values are deleted from the oldest one.

To delete all the stored data, use the Setting Mode.

If the monitor is set to OFF in the Setting Mode, the monitor does not store the measured values.

•The measured values are retained in memory even after the batteries are removed for battery replacement.

1. Push the MEMORY button.

The latest measured values that are stored in memory are displayed with the mark.

2.Check the memory.

Each time you push the button, the latest measured values are displayed. If you push the

button, the screen moves backward to the previous one.

• If you push the button while the latest measured values are being displayed, the oldest measured values are displayed.

•If you push the GRAPH button during the memory display, you can see the measured values of one week (including the called out measured values) in graph display. If you push the MEMORY button again,

the screen returns to the memory display.

Date and

Time of

Measurement

3. Push the START/STOP button to turn off the power.