Memory Feature
2. Press the START/STOP button to turn off the power.
After reading the blood pressure values and pulse rate stored in the monitor, press the START/STOP button
to turn off the power.
SYSmmHg
PULSE/min DIAmmHg
*Even if you forget to turn off the power, the monitor will turn off automatically in approximately 2 minutes.
*The stored measurements will remain in the memory even when The batteries are removed for battery replacement.
•To delete the memory (Everything in the memory will be deleted.)
Press the "M" button while the "M" mark is displayed, then immediately hold down the START/STOP button for more than 2 seconds. (Pressing the START/STOP button first will turn off the power.)
Release the START/STOP button when the "M" mark starts to flash and wait until it finishes to flash.
SYSmmHg
PULSE/min DIAmmHg
SET
TIME / DATE
SYSmmHg
M
SET
TIME / DATE
PULSE/min DIAmmHg
13