Omron Healthcare HEM-630 manual Set the Date Press the Time Setting button, Date is displayed

Page 7

Program Date and Time

3. Set the "Date".

Press the Time Setting button.

• "/1" (date) is displayed.

•Press the Memory Call button and set the number representing the "Date".

4. In the same manner, set the "Hour" and "Minute".

•The number representing the "Hour" is displayed in the 12-hour

unit of morning and afternoon. (For the hour in the afternoon, PM is displayed.)

5. Lastly, the correct time can be set by pressing the Time Setting button according to the time signal when "00" is displayed.

• The current time is displayed and the time setting is completed.

If you measure blood pressure without setting the date and time, blood pressure values will be saved with the incorrect date and time. When you use this monitor for the first time, or after taking out batteries for a long period of time, be sure to adjust the date and time, then use the monitor. After battery replacement, confirm the time first, then use the monitor. If batteries are removed for more than one minute, you must reset the time.

7

Image 7

Contents Ultra Compact Wrist Blood Pressure Monitor Contents Changes in your true blood pressure IntroductionStorage case Wrist Cuff Memory Call Button Battery CoverKnow Your Unit Systolic BloodBattery Life and Replacement Battery Installation/ReplacementTo open or close the Battery Cover It may be damaged Set the Month Program Date and TimeSet the year, month, date, and time Set the YearDate is displayed Set the Date Press the Time Setting buttonCurrent time is displayed and the time setting is completed Same manner, set the Hour and MinuteAs shown in the Figure, cover How to Apply the Wrist CuffWhen measuring on the right wrist Wrap the wrist cuff over bare skinDo not place your right hand on the cuff itself Suggestions Before Measureing Blood PressureInitial display How to Take a ReadingPress the START/STOP button Display turns onDisplay of measurement results Turn off the powerPress the M button Memory FeatureHow to Use the Memory Function Press the Memory Call button M buttonTo turn off the power Press the START/STOP button to turn off the powerSymptom Cause What to do TroubleshootingReplace with new batteries Causes What to doMovement Press Arm or body or Vigorous Movement Arm or Body during MeasurementLicensed Under U.S. PAT FCC CautionCare and Maintenance Days from the date of purchase Limited Five Year WarrantyPhone number on any correspondence May not apply to youName Omron Automatic Blood Pressure Monitor Model Specifications630INST