Omron R6 instruction manual Error Symbol Cause Correction

		6.Handling Errors and Problems
Error Symbol	Cause	Correction
	Cuff over
	inflated.	Press the O/I START button
		once to turn off the power. Sit
		still restart measurement and
		keep still and do not talk dur-
	Movement dur-	ing measurement.
	ing measure-
	ment
		Carefully read and repeat the
	Wrist is not in	steps in “3.2 Taking a Read-
		ing” on p. 14. Make sure that
	the correct
		the setting is set correctly for
	position.
		the wrist being used to take
		the measurement.
	The wrist cuff is	Carefully read and repeat the
	not fastened	steps listed under “3.1 Apply-
	securely.	ing the Wrist Cuff” on p. 12.
	This symbol	Remove the monitor. Wait 2-3
	indicates irreg-
		minutes and then take
	ular or weak
		another measurement.
	pulses are
		Repeat the steps in “3.2 Tak-
	detected, but
		ing a Reading” on p. 14. If this
	result can be
		error continues to appear,
	considered reli-
	able.	consult your doctor.
	An E mark is	Consult your OMRON
	displayed.	retail outlet or distributor.
	The battery	Replace the batteries with
		two new “AAA” alkaline
	power is low.
		(LR03) batteries.

EN

23