Omron R6 instruction manual Preparation Installing/Replacing the Batteries

Page 8

2. Preparation

2.1Installing/Replacing the Batteries

1.Remove the battery cover by pulling it off in the direction of the arrow.

SET

MEM

START

STOP

2. Insert two “AAA” alkaline (LR03) batteries in the battery compart- ment. Make sure their polarity (+/–) is aligned with the polarity (+/–) as indicated in the battery compart- ment.

3. Put the battery cover back in place.

Note: Make sure that the battery cover is securely in position.

MEM

START STOP SET

MEM

START STOP SET

Image 8

Contents Model R6 Contents Introduction Important Safety Information General UsageSave these instructions for future reference Overview Main UnitPackage contents DisplayPreparation Installing/Replacing the Batteries Battery Life & Replacement Setting the Date and Time Preparation Using the Monitor Applying the Wrist Cuff Taking a reading on the left wristTaking measurements on the right wrist Taking a Reading BlipB lipPage What is Irregular Heartbeat? Using the Memory Function To View Previous Readings Stored in MemoryTo Delete All Values in Memory How to Modify the Settings Turning the Position Sensor On/OffSetting the Position Sensor Alarm Turning Right Wrist Measurement On/OffQuick Reference Guide Handling Errors and Problems Symptom Cause CorrectionError Symbol Cause Correction Storage and Maintenance Calibration and ServiceTechnical Data Package ContentTechnical Data Technical Data What is Blood Pressure? Some Useful Information about Blood PressureSome Useful Information about Blood Pressure REP