HoMedics BPA-201 manual Potential for Electromagnetic Interference

Page 15

8.Do not disassemble the monitor or cuff. If in need of repair, refer to the warranty section of this manual.

9.Do not subject the monitor to extreme shocks (do not drop on floor).

10.Do not inflate the cuff unless wrapped around your arm.

11.Do not wrap the cuff around body parts other than your arm.

12.Do not drop or insert any object into any opening­ or hose.

13.To avoid accidental strangulation keep this product away from children. Do not drape tube around neck.

14.This monitor may not meet its performance specifications if stored or used outside of these temperature and humidity ranges:

• Storage Environment • Operating Environment

Temperature:

Temperature:

-4°F~158°F (-20°C~70°C)

50°F~104°F (10°C ~40°C)

Humidity:

Humidity:

less than 90% RH

15% ~ 90% RH

POTENTIAL FOR ELECTROMAGNETIC INTERFERENCE

To avoid inaccurate results caused by electro- magnetic interference between electrical and electronic equipment, do not use the device near a cell phone or microwave oven.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harm- ful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interfer- ence caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harm- ful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter- mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

27

28

Image 15
Contents Automatic Blood Pressure Monitor Table of Contents Important Product Notices and Safety Instructions About Blood Pressure NAME/FUNCTION of Each Part HOW this Blood Pressure Monitor WorksDisplay Explanations Display SymbolsUsing the AC Adapter Using the ARM Cuff Date & Time SET ProcedurePlug the cuff tube into the left side of the unit Important Notes Measurement ProcedureStart Stop Irregular Heartbeat Detector IHB Risk Category IndexRecalling Values from Memory Clearing Values from MemoryImportant Notes Regarding Your Blood Pressure Measurement CARE, Maintenance & CleaningPotential for Electromagnetic Interference Specifications TroubleshootingMonitor Automático de Presion Sanguínea Información DE USO Información InicialAvisos Importantes DEL Producto E Instrucciones DE Seguridad Sobre LA Presión Sanguínea NOMBRE/FUNCIÓN DE Cada Pieza Cómo Funciona Este Monitor DE Presión SanguíneaSímbolos de la pantalla Explicaciones DE LA PantallaUSO DEL Adaptador DE CA Instalación DE LAS PilasUSO DEL Brazalete Procedimiento DE Configuración DE Fecha Y HoraNota Notas importantes Procedimiento DE MediciónNota Índice DE Categoría DE RiesgoCómo Recuperar LOS Valores DE LA Memoria Cómo Borrar LOS Valores DE LA Memoria CUIDADO, Mantenimiento Y Limpieza Potencial DE Interferencia Electromagnética Especificaciones Diagnóstico Y Resolución DE ProblemasTeléfono