LifeSource UA-789 manual What Display Symbols Mean, Display Symbol Condition/Cause

WHAT DISPLAY SYMBOLS MEAN

	Display Symbol	Condition/Cause	Recommended Action
		The symbol shown while mea-	Measurement is in progress,
		surement is in progress. It blinks	remain as still as possible.
		while detecting the pulse.
		An irregular heartbeat or body	Take measurement again and
		movement may have occurred.	consult with your physician.
		Refer to page E-11 for more infor-
		mation on irregular heartbeats.
		Previous measurement stored in
		MEMORY.
		The battery power indicator dur-	Replace all batteries with new
	Battery Full	ing measurement.	ones when the symbol blinks.
			Alkaline batteries recom-
		The batteries are low when it	mended.
	Battery Low	blinks.
		Unstable blood pressure due to	Try the measurement again.
		excessive body movement.	Remain very still during the
			measurement.
		The systolic and diastolic values	Fasten the cuff correctly, and try
		are within 10 mmHg of each	the measurement again.
		other.
		The pressure value did not	Check for air leaks along the
		increase during inflation.	tube and around the air socket.
		The cuff is not fastened correctly.	Refasten the cuff and retake
			measurement.
		There is an air leak in the cuff or	Make sure tube is properly con-
		monitor.	nected to cuff and monitor.
		The pulse is not detected cor-	Try the measurement again.
		rectly.	Remain very still during the
	PULSE DISPLAY ERROR		measurement.
		Cuff Inflation Meter	Measurement is in progress,
			remain as still as possible
		Pressure Rating Indicator™	Refer to the section “About
			Pressure Rating Indicator” for
			further explanation.
E-2		LifeSource Health Line (Toll-Free): 1-888-726-9966