LifeSource UA-705 ? What Display Symbols Mean, Display Condition/Cause Recommended Symbol Action

?WHAT DISPLAY SYMBOLS MEAN

Display		Condition/Cause	Recommended
Symbol			Action
		The symbol shown while measure-	Measurement is in progress, remain
		ment is in progress. It blinks while	as still as possible.
		detecting the pulse.
		An irregular heartbeat or body move-	Take measurement again and con-
		ment may have occurred. Refer to	sult with your physician.
		page E-9 for more information on
		irregular heartbeats.
		Previous measurement stored in
		MEMORY.
		The battery power indicator during	Replace all batteries with new ones
	Battery Full	measurement.	when the symbol blinks. Alkaline
	Battery Low	The batteries are low when it blinks.	batteries recommended.
		Unstable blood pressure due to	Try the measurement again. Remain
		excessive body movement.	very still during the measurement.
		The systolic and diastolic values are	Fasten the cuff correctly, and try the
		within 10 mmHg of each other.	measurement again.
		The pressure value did not increase	Check for air leaks along the tube
		during inflation.	and around the
			air socket.
		The cuff is not fastened correctly.	Refasten the cuff and retake meas-
			urement.
		There is an air leak in the cuff or	Make sure tube is properly connect-
		monitor.	ed to cuff and monitor.
		The pulse is not detected correctly.	Try the measurement again. Remain
PULSE DISPLAY ERROR			very still during the measurement.
		Cuff Inflation Meter	Measurement is in progress, remain
			as still as possible.
		Pressure Rating Indicator™	Refer to the section “About Pressure
			Rating Indicator” for further expla-
			nation.
		Appears on display prior to and dur-	Press exhaust button to release air.
		ing measurement. Blinks if there is air
		in cuff at power up.
		Cuff needs to be inflated for proper	Inflate cuff 30 to 40 mmHg above
		measurement.	your normal systolic pressure.

E-2 ? In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991