Omron M2 basic instruction manual Preparation Installing/Replacing the Batteries

Page 10

2.Preparation

2. Preparation

2.1Installing/Replacing the Batteries

1.Turn the main unit upside down.

2.Slide the battery cover in the

direction of the arrow while pressing the ribbed part of the cover.

3. Install or replace four “AAA” size batteries so that the

+ (positive) and - (negative) polarities match the polarities indicated on the battery compartment.

4.Put the battery cover back in place.

Slide the battery cover as indicated, until it clicks into place.

Note: The measurement values continue to be stored in memory even after the batteries are replaced.

10

Image 10

Contents Model M2 Basic Digital Automatic Blood Pressure MonitorContents Introduction Important Safety Information General UsageGeneral Precautions Important Safety Information Overview Display Package Contents others Preparation Installing/Replacing the Batteries Battery Life & Replacement Correct Posture Sit upright with your back straightIncorrect Posture Applying the Arm Cuff Taking Measurements on the Right Arm Taking a Reading Diastolic blood pressure Pulse displayArm cuff is too loose Movement or talking During measurementUsing the Unit Instructions for Special Conditions Using the Memory Function To Delete the Value Stored in Memory Quick Reference Guide Handling Errors and Problems Error Messages Error Display Cause RemedyBlinks or Appears ContinuouslyTroubleshooting Problem Cause RemedyProblem Cause Remedy Maintenance and Storage MaintenanceStorage Wide Range Cuff Medium Arm Cuff Arm circumference 22 42 cm Optional PartsLarge Arm Cuff AC Adapter S Technical Data Technical Data What is Blood Pressure? Some Useful Information about Blood PressureSystolic blood pressure mmHg Severe hypertension Production facility ManufacturerEU-representative Subsidiary Handelsgesellschaft mbH