Omron M3W instruction manual Complete If your systolic pressure is

3. Using the Unit

START INFLATE DEFLATE END	COMPLETE If your systolic pressure is
	more than 220 mmHg

After the cuff starts to inflate, press and hold the O/I START button until the monitor inflates 30 to 40 mmHg higher than your expected systolic pressure.

Notes:

• The monitor will not inflate above 299 mmHg.

• Do not apply more pressure than necessary.

EN

Notes:

•During measurement, the buzzer (if set to “on”) will beep in rhythm with your heartbeat.

•Wait 2-3 minutes before taking another blood pressure measurement. Waiting between readings allows the arteries to return to the condition prior to taking the blood pressure measurement.

Warning:

Self-diagnosis of measured results and treatment are dangerous. Please follow the instructions of your doctor.

9