Omron M3W instruction manual Troubleshooting and Maintenance, Icons and Error Messages

4.Troubleshooting and Maintenance

4.1The Icons and Error Messages

Error Display	Cause	Remedy
		Remove the arm cuff. Wait 2-3 minutes and then
	Irregular or weak pulses are detected.	take another measurement.
		Repeat the steps in section 3.3. If this error
		continues to appear, contact your doctor.
	Movement during measurement.	Carefully read and repeat the steps in section 3.3.

	Cuff is not applied correctly.	Apply the arm cuff correctly. Refer to section 3.1.
		You should replace them with new ones ahead of
Blink	The batteries are low.	time.
		Refer to section 2.1.
Lit	The batteries are exhausted.	You should replace them with new ones at once.
		Refer to section 2.1.

14