3.Using the Unit
2.Put your left arm through the cuff
loop.
Note: If the cuff is not assembled, pass the end of the cuff furthest from the tubing through the metal
3.Position the arm correctly.
1)The air tube should run down the inside of your forearm and be in line with
your middle finger.
2)The bottom of the cuff should be approximately 1
to 2 cm above your elbow.
3) Apply the cuff to your upper arm so that the coloured marker (blue arrow under tube) is centered on the middle of your inner arm and points down the inside of the arm.
4.When the cuff is positioned correctly, close the fabric fastener
FIRMLY.
20