Maintenance and spare parts, Calibration

Maintenance and spare parts

•Use a soft, slightly moistened cloth to clean the OMRON RX-3.

Caution! Do not use petrol, thinners or similar solvents!

•Use a soft, moistened cloth and soap to clean the wrist cuff.

Caution! Do not wash the wrist cuff! Caution! Do not use petrol, thinners or similar solvents!

•Do not carry out repairs of any kind yourself. If a defect occurs consult your OMRON retail outlet or distributor as mentioned on the packaging.

Calibration

•It is recommended to have the OMRON RX-3 inspected every two years to ensure correct function and accuracy. Consult your OMRON retail outlet or OMRON distributor as mentioned on the packaging.

RX-3 English

Replace batteries

•Remove the battery out of the battery compartment and insert two new identical 1.5V alkaline batteries type AAA LR03 batteries.

Spare parts

•Due to high company quality standards, OMRON considers the main unit as a non-serviceable part because the need for proper calibration after replacement of high tech components.

•If the cuff needs to be replaced have this done by an authorised expert. Consult your OMRON retailer or OMRON distributor as mentioned on

the packaging.

Attention! Disposal of batteries and the OMRON RX-3 should be carried out in accordance with the national regulations for the disposal of electronic products.