Oregon BPW128 manual Introduction, Information Concerning the CE Symbol, Before use please note

Page 3

WRIST TYPE BLOOD PRESSURE

MONITOR

MODEL: BPW128

USER’S MANUAL

INTRODUCTION

Thank you for purchasing the Wrist Blood-Pressure Monitor (BPW128). This unit has been constructed using reliable circuitry and durable materials. Used properly, this unit will provide years of satisfactory use.

Before use please note:

-This device is intended for non-invasive measuring and monitoring of arterial blood pressure. Designed for use on the wrist, it is not intended for use on other extremities or for other functions other than obtaining a blood-pressure measurement.

-If the cuff pressure exceeds 300mmHg, this unit will automatically deflate. Should the cuff not deflate when pressures exceeds 300mmHg, the user is required to detach the cuff from the wrist.

-Do not begin medical treatment based solely on obtained measurement values from this device. Consult a physician for treatment advice.

-To avoid measurement errors, read this manual carefully before use.

G B

INFORMATION CONCERNING THE CE

SYMBOL

This device complies with the European regulations based on the Medical Products Code, and bears the CE mark “CE0123”. The device has been quality inspected according to EG guideline 93/42/EWG and tested in compliance to the EN1060-1 Non-invasive sphygmomanometers-Part 1, General requirements and EN1060-3 Non-invasive sphygmomanometers-Part 3: Supplementary requirements for electromechanical blood pressure measuring systems. It is therefore not subject to calibration regulations and does not bear a calibration stamp.

The CE mark further indicates that this blood pressure monitor meets the general requirements for electronic products as regards resistance to electromagnetic interference. Malfunctioning may however occur in the proximity of extremely strong electromagnetic fields.

In accordance with the “Ordinance for Operators of Medical Products”, a technical inspection must be carried out if this device is used for industrial or commercial purposes.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Min LOG BookPage Information Concerning the CE Symbol IntroductionBefore use please note Description and Function Parts DISPLAY-SYMBOL Description Installing BatteriesReplace the batteries if Proper Equipment Setup What is Mean Arterial Pressure MAP Blood Presure DefinitionsOscillometric Measuring Method Measurement Refer to Fig1 HOW to Take MeasurementRefer to Fig2 HOW to Recall Values from MemoryRefer to Fig3 HOW to SET the TimeAutomatic Power OFF Error MessagesDisplay Description Remedies Operating environment MAINTENANCE, Cleaning and CareSpecifications Here are a few product care instructionsSymbol Descriptions Important Advice Retain for Future ReferenceManufacturer If the device does not function

BPW128 specifications

Oregon BPW128 is an innovative product from Oregon, a well-known brand in the outdoor equipment and tool industry. This specific model is designed primarily for cutting and trimming, proving to be an essential tool for both professionals and DIY enthusiasts.

One of the standout features of the Oregon BPW128 is its impressive battery life, which allows users to engage in extended periods of work without the need for frequent recharging. Equipped with advanced lithium-ion technology, this product ensures reliable power delivery and quick charging capabilities, making it perfect for those working on larger properties or during extended landscaping projects.

The Oregon BPW128 also combines a lightweight design with ergonomic handles, reducing user fatigue during prolonged use. This makes it easier to maneuver, especially in tight spaces or when reaching for overhead branches. Its balance promotes a natural grip, contributing to better control and precision during cutting operations.

In terms of performance, the Oregon BPW128 employs a cutting-edge brushless motor. This type of motor is known for its efficiency and greater power output compared to traditional motors, delivering consistent performance across various terrains and vegetation types. Additionally, the unit's design minimizes vibration, making it not only smoother to operate but also decreasing the wear and tear on the user’s body over time.

The Oregon BPW128 comes equipped with a dual transition cutting system, which allows users to easily switch between different cutting modes. This versatility means it can handle various tasks, from trimming small bushes to tackling tougher, thicker branches. The model features adjustable speed settings, enabling users to adapt the tool’s power to the material they are working with.

Another distinctive characteristic is the safety features integrated into the design. The Oregon BPW128 includes a guard that protects users from debris while cutting and a safety lock to prevent accidental activation. These thoughtful additions facilitate safe operation, especially in busy work environments.

Overall, the Oregon BPW128 is an efficient, versatile, and user-friendly tool that meets the demands of modern gardening and landscaping tasks. Its combination of power, durability, and advanced technology positions it as a frontrunner in the market, making it an ideal choice for anyone looking to enhance their cutting and trimming capabilities.
Top Page Image Contents