Panasonic CU-E12JKK Information, Models Number, For Seasonal Inspection After Extended NON-USE

Page 9

INFORMATION

Information for Users on Collection and Disposal of Old Equipment and used Batteries

ENGLISH

[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.

Note for the battery symbol (bottom two symbol examples):

This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved.

Pb

 

Models Number

 

CS-E9JKKW / CU-E9JKK

Single Split System

CS-E12JKKW / CU-E12JKK

 

CS-E18JKK / CU-E18JKK

Multi Split System

CS-E12JKKW, CS-E12JKKW / CU-2E18JBK

The above listed models have been designed and manufactured to meet ENERGY STAR® criteria for energy efficiency when matched with appropriate coil components. However, proper refrigerant charge and proper air flow are critical to achieve rated capacity and efficiency. Installation of this product should follow the manufacturer’s refrigerant charging and airflow instructions. Failure to confirm proper charge and airflow may reduce energy efficiency and shorten equipment life.

FOR SEASONAL INSPECTION AFTER EXTENDED NON-USE

Checking of remote control batteries.

No obstruction at air inlet and air outlet vents.

After 15 minutes of operation, it is normal to have the following temperature difference between air inlet and air outlet vents:

Cooling: ≥ 8°C

Heating: ≥ 14°C

FOR EXTENDED NON-USE

Activate Heat mode for 2~3 hours to remove moisture left in the internal parts thoroughly to prevent mould growth.

Turn off the power supply.

Remove the remote control batteries.

SERVICEABLE CRITERIAS

TURN OFF POWER SUPPLY then please consult authorized dealer under the following conditions:

Abnormal noise during operation.

Water/foreign particles have entered the remote control.

Water leaks from Indoor unit.

Circuit breaker switches off frequently.

Power cord becomes unnaturally warm.

Switches or buttons are not functioning properly.

Timer indicator blinks.

9

Image 9
Contents Quick Guide Guide Sommaire EnglishFrançais Temperature C Indoor Safety PrecautionsTemperature C Outdoor Operation ConditionPower Supply Air InletAir Outlet Definition Multi AIR Conditioner SystemIndoor Unit Remote Control To Reach Temperature To SET the TimerTo Enjoy Quiet Operation QuicklyFollowing symptoms do not indicate malfunction TroubleshootingSymptom Unit stops and the timer indicator blinksInformation Serviceable CriteriasModels Number For Seasonal Inspection After Extended NON-USEMode Quick GUIDE/GUIDE SommaireOFF/ON Temp