Omega Engineering HH505 Hi Limit value Recall display mode, Lo Limit value Recall display mode

Page 10

10Hi Limit value Recall display mode

Press Hi RECALL key to display the Hi set Limit value on second display. Press Hi RECALL key again to exit this mode.

11Lo Limit value Recall display mode

Press Lo RECALL key to display the Hi set Limit value on second display. Press Lo RECALL key again to exit this mode.

12Hi/Lo Limits mode (only Main display)

Press Hi/Lo Limits key to enter the Hi/Lo Limits comparative mode, when input temperature value exceed Hi or Lo Limits value. The beeper emits a continuity pulse tone. Press Hi/Lo Limits key again to exit the Hi/Lo Limits mode.

Image 10

Contents Omega Omega.comTM Safety Information IntroductionSpecifications ElectricalEnvironmental GeneralRelative value Recall display mode Power SwitchOperating Instructions MIN MAX with Time record Mode Pt385/Pt3926 T1 Input RTD Probe SelectREL Relative mode Page Lo Limit value Recall display mode Hi Limit value Recall display mode12 Hi/Lo Limits mode only Main display Battery Replacement Operator MaintenanceRTD Probe Connection Temperature VS Resistance TABLEITS90 HH 504 / HH 505 Calibration Procedure Warranty / Disclaimer Temperature