Omega Engineering HH502 manual 10 T1/T2/T1-T2 second display Input Selection

Page 10

4.When the thermometer is turned on. The Relative set value and Hi/Lo Limits set value that was in use when thermometer was last turned off set values.

10T1/T2/T1-T2 second display Input Selection

The input selection indicates which input is selected for second display; T1 thermocouple, T2 thermocouple or the difference between the two thermo- couples (T1-T2), when the thermometer is turn on, it is set to T2 input can select alternate of thermocouple by second display K/J key switch.

11K/J T2 Input thermocouple type select (second display)

The K/J key switch the T2 input selects the K-type or J-type thermocouple as input, when second display input selected T2.

When the thermometer is turned on, it is set to the type selected that was in use when the thermometer was last turned off.

12Hi/Lo Limits mode (only Main display)

Press Hi/Lo Limits key to enter the Hi/Lo Limits comparative mode, is displayed, when input temperature value exceed Hi or Lo Limits value. The beeper emits a continuity pulse tone. Press Hi/Lo Limits key again to exit the Hi/Lo Limits mode.

8

Page 9 Page 11
Image 10
Page 9 Page 11
Contents HH502 Servicing North America Safety Information IntroductionSpecifications ElectricalEnvironmental Hold Mode only Main display Power SwitchF Selecting the Temperature Scale Operating InstructionsT1 /T2/T1-T2 Main display Input Selection MIN MAX with Time record Mode only Main displayJ T1 Input Thermocouple Type Select Main display REL Relative mode only Main display Sec. Minu. Selecting the Time scale 10 T1/T2/T1-T2 second display Input Selection 12 Hi/Lo Limits mode only Main display11 K/J T2 Input thermocouple type select second display Operator Maintenance Battery ReplacementCalibration Procedure Page Page WARRANTY/ Disclaimer Temperature
Top Page Image Contents