Cleaning instructions, Indoor unit | Panasonic CS-C18PKF-3 manual

Cleaning instructions

To ensure optimal performance of the unit, cleaning has to be carried out at regular intervals. Please consult authorised dealer.

•Switch off the power supply and unplug before cleaning.

•Do not touch the aluminium ﬁn, sharp parts may cause injury.

•Do not use benzine, thinner or scouring powder.

•Use only soap ( pH 7) or neutral household detergent.

•Do not use water hotter than 40 °C.

Indoor unit
Front panel	Aluminium ﬁn

Wipe the unit gently with a soft, dry cloth.

Do not hit or violently press or poke it with a sharp object. This can lead to damage and malfunction.

Every 6 months

• Clean with dry cotton bud.

• Do not touch during operation.

Every 2 weeks

Wash gently and dry.

Remove the front panel

2 Pull out

1 Raise

3Press both ends of the front panel

1Insert at both sides

• Wash/rinse the ﬁlters gently with water to avoid damage to the ﬁlter surface.

•Dry the ﬁlters thoroughly under shade, away from ﬁre or direct sunlight.

•Replace any damaged ﬁlters.

Remove air ﬁlter	Attach air ﬁlter
	Insert into the unit

For seasonal inspection after extended non-use

•Checking of remote control batteries.

•No obstruction at air inlet and air outlet vents.

•After 15 minutes of operation, it is normal to have the following temperature difference between air inlet and air outlet vents:

COOL: ≥ 8 °C

2 Close down

4For CS-C18PKF-3, CS-C24PKF-3: Press at center of the front panel.

•Activate nanoe-G operation for 2~3 hours as an alternative to remove moisture left in the internal parts thoroughly to prevent mould growth.

•Turn off the power supply and unplug.

•Remove the remote control batteries.