Panasonic CU-C24PKF-3, CU-C12PKF-3 To learn more, Nanoe-G in-filter deactivation, Operation mode

To learn more...

Operation mode

COOL: Use curtains to screen off sunlight and outdoor heat to reduce power consumption during COOL mode.

DRY : Unit operates at low fan speed to give a gentle cooling operation.

nanoe-G in-filter deactivation

Depending on the unit’s accumulated operation time, nanoe-G in-filter deactivation may activate only once a day after the unit turned off.

To remove the moisture left in the internal parts, the fan will operate for 30 minutes with louver opened slightly. This process only applicable when the unit is operated in COOL/DRY mode before turned off. Then, nanoe-G deactivates viruses/bacteria on the filter for 2 hours with fan stopped and louver closed.

Do not turn off the power supply during this operation. After power failure, this operation will not resume.

ECONAVI and AUTO COMFORT

AUTO

ECONAVI COMFORT or

The unit will start to initialise	The human activity sensor
	and the sunlight sensor will
(for approximately 1 minute)
	start to detect.

Note

AIR SWING When manual AIR SWING is selected, the ECONAVI and AUTO COMFORT operations will be cancelled.

Human activity sensor operation

ECONAVI ; Detecting human presence and activity, the unit controls room temperature to save energy.

Mode	Human	Low activity	Normal activity	High activity	Absent
		+1 °C			+2 °C
COOL/DRY	Set
	temperature

AUTO COMFORT ; Detecting human presence and activity, the unit controls room temperature to keep human comfortable consistently.

Mode	Human	Low activity	Normal activity	High activity	Absent
		+1 °C			+2 °C
	Set
COOL/DRY	temperature			-1 °C
	Set			+1 tap
	Fan Speed

*During low activity, fan speed 1 tap up for first 15 minutes or until set temperature is reached.

**During human absence, maximum fan speed for COOL/DRY mode is medium fan.

8