To Drain the Water, Pour Vider LA Baignoire

TO ATTACH HEADREST:

FIXATION DE L’APPUI-TÊTE : ENGANCHE DEL REPOSACABEZA:

Fig. 6

Fig. 7

To attach Headrest, the strap should go under and around to otherside of Cuddle Net (Fig. 6) and reattach to Headrest.

The center area of Headrest that is slightly raised, was designed for comfort to fit base of child's neck (Fig. 7).

Pour fixer l’appui-tête, la sangle doit passer sous le filet, être ramenée sur l’autre côté du filet enveloppant (Fig. 6), puis être rattachée à l’appui-tête.

La partie bombée au centre de l’appui-tête est conçue pour se mouler à la nuque du bébé et procurer plus de confort (Fig. 7).

Para enganchar el reposacabeza, pase la correa por debajo y alrededor de la red (Fig. 6) y engánchela de nuevo al reposacabeza.

El área central del reposacabeza que está levemente elevada fue diseñada para dar acomodo a la base del cuello del niño (Fig. 7).

Fig. 8

Be sure Foot Bar is snapped into position. Carefully place baby into Cuddle Net (Fig. 8).

Assurez-vous que la tige inférieure est bien enclenchée. Déposez délicatement le bébé dans le filet enveloppant (Fig. 8).

Asegúrese de que el reposapiés esté trabado en su lugar. Con cuidado, coloque al bebé en la red (Fig. 8).

Fig. 9

TO DRAIN THE WATER:

Locate drain plug near bottom of tub (Fig. 9).

POUR VIDER LA BAIGNOIRE :

Localisez le bouchon de vidange dans le bas de la baignoire (Fig. 9).

PARA VACIAR EL AGUA:

Ubique el tapón de desagüe cerca del fondo de la tina (Fig. 9).

Fig. 10

Fig. 11

Pull up on tab and water will begin to flow out (Fig. 10).

When water is completely drained, push plug back into place sealing tub for the next bath (Fig. 11).

Soulevez la languette et l’eau commencera à s’écouler (Fig. 10).

Une fois l’eau complètement écoulée, remettez le bouchon en place de façon à sceller la baignoire pour le prochain bain (Fig. 11).

Tire de la pestaña y el agua comenzará a vaciarse (Fig. 10).

Cuando el agua se haya vaciado completamente, coloque el tapón en su lugar sellando así la tina para el siguiente uso (Fig. 11).

2562, 2560 specifications

Graco is a well-respected name in the world of fluid management, and their Graco 2560 and 2562 models illustrate the company’s commitment to innovation and quality. These high-performance airless paint sprayers are designed for both professional contractors and serious DIY enthusiasts, offering a range of features that enhance efficiency and reliability.

One of the standout features of the Graco 2560 and 2562 models is their robust ProConnect system. This innovative technology allows users to easily swap out the pump without the need for tools, minimizing downtime and maximizing productivity. This is particularly important on large job sites where time is of the essence. Both models are equipped with powerful motors that ensure a consistent flow of material, enabling users to tackle various projects with ease.

The Graco 2560 and 2562 also feature the SmartControl technology, which provides precise pressure control. This allows users to adjust the pressure to match the application requirements, whether it’s a fine finish on a detailed trim or a heavier application on a larger wall surface. The ability to fine-tune the pressure reduces overspray and improves the overall finish quality, making the sprayers versatile for different materials and surfaces.

Another characteristic that sets these models apart is their compatibility with a wide range of materials, from thin varnishes to thick latex paints. This versatility is complemented by Graco’s MaxLife technology, which extends the life of the sprayer through improved wear and tear resistance. It’s designed to reduce maintenance needs and allow for extended usage on various job applications.

The Graco 2560 and 2562 also come with convenient features such as a built-in filter to minimize clogs and a flexible suction tube that allows for the capability to spray directly from a 1-gallon container. This enhances portability and ease of use on job sites where mobility is key.

In terms of design, both models are user-friendly, with intuitive controls and a lightweight build that facilitates maneuverability. This ergonomic design is crucial when working on extended projects, as it reduces fatigue for the user.

Overall, the Graco 2560 and 2562 airless paint sprayers represent a blend of efficiency, flexibility, and durability. With advanced technologies and thoughtful features, they stand out as excellent choices for anyone in need of high-quality paint application tools. Whether for professional use or for ambitious home improvement projects, these sprayers deliver exceptional performance and reliability.