Citizen ch607 instruction manual Battery Replacement, Clock Mode, Setting Date and Time

Page 8

BATTERY REPLACEMENT

1.To use this unit, you must install batteries, If

the battery mark “ ” is displayed, you must change both batteries.

2.Open battery cover as illustrated. Replace the two batteries, matching the (+) and (–) polari-

ties on each battery with the polarity marks on the case.

•To take the batteries out easily, pull the trans- parent ribbon.

3.“LR03” batteries or equivalent are suitable for this blood pressure monitor. All batteries used must be same type. Do not mix alkaline, stan- dard (carbon-Zinc) or rechargeable (cadmium) batteries. Also, do not mix old and new batter- ies.

CLOCK MODE

1.Default time indicating state and selection of each mode

When the battery is installed, the time and date are set as follows.

January 1 , 12:00:00 AM

2. Setting Date and Time

1)Press the “Mode” switch then “Month” starts flashing and press “SET” button to set the cor- rect month. (Each time the “Set” switch is pressed, the value of the month is increased

- Eng 8 -

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model CH607 General Remarks For proper measurement of blood pressurePrecaution for USE Precaution for usePrecaution for maintenance Cleaning method of CuffNature and frequency of mainte- nance Protect the natural environmentWHO blood pressure classifica- tions Reference European standardManufacturer European RepresentativeDevice Description Name of the partsDescription of display symbols Battery Replacement Clock ModeDefault time indicating state and selection of each mode Setting Date and TimeMeasurement Procedures Attaching of wrist cuffMeasurement Procedures for People With a Weak Pulse To start the MeasurementTurn Power off Automatic power-off functionMemory recall Memory clear functionError Description of Display Marks Specifications LCD
Top Page Image Contents