Accessing the Wizard | 37 |
PPPoE Mode
Figure 17 PPPoE Screen
To setup the Router for use with a PPP over Ethernet (PPPoE) connection, use the following procedure:
1Enter your PPP user name in the PPPoE User Name text box.
2Enter your PPP password in the PPPoE Password text box.
3Enter your PPP over Ethernet service name in the PPPoE Service Name text box.
Do not enter anything in this box if your ISP does not require a service name.
4Select Dial on Demand if you want the the internet connection dropped when there is no activities with the Internet. Enter an idle time from the Maximum Idle Time drop down list. This is the amount of time without Internet activity that you want to allow before the Router ends the PPPoE session.
5Manual IP Address/DNS Server configuration: Enter the IP Address that you would like to be assigned to the router’s WAN interface if you have required one from your ISP. And enter the DNS Server’s IP Address if it is given by your ISP(optional).
6Check all of your settings, and then click Next.
