Advanced 81

Advanced

Selecting Advanced from the main menu displays the following seven

 

tabs in your Web browser window: Static Route, RIP, DDNS, Quality of

 

Service, ProxyARP, Port Mapping, and IPSec.

Static Route The Router supports static route functionality. Select the Static Route tab to display the screen.

Figure 53 Static Route screen

Please enter the following values in the box respectively to specify a static route:

Network Address — the network address of the route. If network address and subnet mask are both set to 0.0.0.0, this is the default route.

Subnet Mask — the subnet mask of the route. If network address and subnet mask are both set to 0.0.0.0, this is the default route.

Gateway — the gateway used to route data to the network specified by the network address.

The network interface associated with the IP address.

RIP The Router supports the Routing Information Protocol (RIP). RIP allows you to set up routing information on one RIP enabled device, and have

Page 81
Image 81
3Com 3CRWDR200A-75, 3CRWDR200B-75, WL-553 manual Advanced, Service, ProxyARP, Port Mapping, and IPSec