40CHAPTER 4: RUNNING THE SETUP WIZARD
IP over ATM Mode(IPoA)
Figure 20 The IP over ATM Screen
To set up the Router for use with an IPoA mode, use the following procedure:
1WAN IP Address: Enter the IP Address given by your ISP.
2WAN Subnet Mask: Enter the subnet mask given by your ISP.
3Manual Default Gateway Configuration: Select this option to enter the WAN interface’s IP Address if you are given with this information by your ISP or select a WAN interface to use to connect to it.
4Manual DNS configuration: Enter the DNS server’s address from the ISP if it is required. (this is optional).
