AUTO, HEAT, COOL, DRY
| AUTO |
| FAN |
|
| HEAT |
| SPEED |
|
| COOL |
|
|
|
| DRY |
| AIR | 2 OFF/ON |
1 MODE |
|
| SWING | |
MODE OFF/ON |
| |||
Select the |
|
|
| Start the |
QUIET |
|
| operation. | |
desired |
|
| ||
|
|
|
| |
operation. | POWERFUL TEMP FAN SPEED |
| ||
|
| AIR SWING | 3 | |
| TIMER |
|
| |
| ON |
| SET | |
| 1 | 2 | 3 | Set the |
| OFF |
| CANCEL | |
|
|
| AC RC | temperature. |
| SET CHECK CLOCK | RESET | (16°C~30°C) | |
●Supersonic air purifying device operates automatically once the unit is switched on.
●POWERFUL and QUIET operations are available in all modes.
●Press OFF/ON
again to stop the operation.
■Operation Details
AUTO - Automatic Operation
•Unit selects the operation mode according to temperature setting, outdoor and room temperature.
•The power indicator blinks during operation.
•Operation mode is reselected every 30 minutes.
HEAT - Heating Operation
•In heating mode, it takes a while for the unit to warm up. The power indicator blinks during this operation.
COOL - Cooling Operation
•Enjoy cool air at your desired temperature.
DRY - Soft Dry Operation
•Keeps your environment dehumidified by running a very gentle cooling operation.
•During soft dry operation, the indoor fan operates at low fan speed.
■Hint
•A temperature setting 1°C higher in cooling operation or 2°C lower in heating operation than the desired temperature equates to a 10% power saving.
ENGLISH
Troubleshooting
● Mist emerges from indoor unit. | ► Condensation effect due to cooling process. |
● Heating/Cooling operation does not work. | ► Ensure temperature is set correctly. |
| ► Make sure windows and doors are closed. |
| ► Make sure filters are cleaned and replaced. |
| ► Make sure inlet and outlet vents are cleared. |
|
|
● Water flowing sound during operations. | ► Cause by refrigerant flow inside the unit. |
|
|
●The power indicator blinks during the operation and ► The unit is in defrost mode, and the melted frost is drained from the
the indoor fan is stopped. | outdoor unit. |
5