SYSTOLIC mmHg |
| DIASTOLIC mmHg |
|
| PULSE /min |
SYSTOLIC mmHg |
| DIASTOLIC mmHg |
|
PULSE /min
When the measurement has been completed, the systolic blood pressure, the diastolic blood pressure and the pulse rate are alternately displayed and the air is discharged.
The systolic blood pressure and the diastolic blood pres- sure are displayed for about 2 seconds and the pulse is displayed for about 1 second.
The measured data are registered automatically, as long as they are not error.
When a person with maximum blood pressure of 170 mmHg or higher uses the unit for the first time, or after changing batteries, measure blood pressure using the manual set- ting. If the automatic pressure setting is used, it may not work.
Automatic Pressure Setting
●This product automatically sets the pressure based on the previous measurement, so you can easily measure blood pressure by pressing one button without reset- ting the pressure for each measurement. If several people use the unit, we recommend using the manual settings as follows.
Manual Pressure Setting
●When several people use the unit, set the pressure value manually. Please note that if the manual pressure set- ting is not used, pressure will be automatically applied based on the value set by the previous user.
If the previous user had a high pressure setting, that high pressure will automatically be used for the current user. If you feel pain in your arm, press the “POWER / START” switch immediately to turn of the power.
1.Put the arm cuff around your arm, plug the air hose into the unit, and keep your arm at the level of your heart.
2.Keep the “POWER / START” switch depressed until the pressure display shows the optimal pressure set- ting. (The optimal pressure setting is about 40 mmHg higher than your usual maximum blood pressure.)
3.When the pressure display reaches the optimal pres- sure value, release the “POWER / START” switch. When the “POWER / START” switch is released pressuriza- tion will finish and measurement will start. Manual pres- sure settings can be selected between 160 mmHg - 280 mmHg. If you release the “POWER / START” switch before reaching 160 mmHg, the unit will pressurize to 160 mmHg. If the unit senses that the pressure is not high enough, it will apply more pressure.
English