Citizen CH-432B Turn Power OFF, Subsequent Measurement, Automatic Power OFF Function

3. Turn Power OFF

Press the “POWER / START” switch to turn off.

4. Subsequent Measurement

When a measurement is need again, 10 minutes, interval is necessary between measurements.

5. Automatic Power OFF Function

If the unit is left without any operation after measure- ment, an “Automatic Power-OFF Function” runs to turn off the power after approximately 3 minutes. To continue measurement, press the “POWER / START” switch again.

6. Battery Replacement

If the batteries are almost empty, the “ ” mark will be displayed. In this case, batteries should be replaced with new one.

Battery cover

Remove the battery cover at mainframe and replace four type “AA” batteries.

Batteries are almost empty.

Batteries are normal.

Note: The memory data are erased when you replace the batteries.

•The batteries that are included power the monitor. They may not last as long as indicated.

•If manganese batteries are used at a low room tempera- ture, such as in the winter or for other reasons, the bat- teries may not function properly and you may not be able to measure your blood pressure.

•Please dispose of used batteries properly to protect the environmental.

- Eng 10 -