Graham Field 707A-INS-LAB-RevD11 user manual Maintenance

Page 13

MAINTENANCE

s NOTICE: To prevent product damage, please follow these recommended care and maintenance instructions:

Do not drop or pull excessively on monitor components or subject them to strong impact.

Do not use monitor close to any device with a strong electrical field such as television, microwave oven, X-Ray equipment, etc.

Never inflate cuff above 300mmHg. Never inflate cuff unless it is positioned on an arm.

Do not expose the monitor components to direct sunlight, high temperature, or high humidity.

Do not put any part of monitor in contact with sharp objects which could pierce the material and cause damage.

Do not dismantle or disassemble monitor components.

Cleaning

Wipe off all components with a clean, dry cloth. Do not use solvents or other

 

petroleum-based cleaners. Do not press cuff with a hot iron.

 

 

Storage

Always deflate the cuff completely before storage.

 

Remove the batteries when the device is to be stored for extended periods of

 

time. Info: Removing the batteries will erase all readings in memory.

 

 

Labtron Digital Blood Pressure Monitor

13

Image 13
Contents Item 707A 707AX, 707AC Digital Blood Pressure Monitor Contents Intended USE Safety Guidelines Please Read Before USEFeatures Blood Pressure Battery Installation / ReplacementPreparing to measure blood pressure Excessive Constriction Inch Measuring blood pressure Systolic Diastolic Pulse rate Labtron Digital Blood Pressure Monitor Labtron Digital Blood Pressure Monitor Maintenance Error indicators TroubleshootingGeneral troubleshooting Specifications Labtron Digital Blood Pressure Monitor Warranty Blood Pressure Measurement LOG