Troubleshooting

Error indicators

	Indication	Cuff pressure reaches 330mmHg

	Cause	Twisted bladder inside cuff

	Correction	Ensure that bladder lies flat within cuff

	Indication	"Err" displays, cuff pressure releases, then "0 pressure" displays

	Cause	Excessive arm movement or talking during measurement

	Correction	Turn monitor OFF then ON and measure again while remaining still

	Indication	Could not obtain pulse rate

	Cause	Cuff was too loosely applied, extremely weak pulse, or arrhythmia

	Correction	Reapply cuff and measure again; if problem persists after cuff is
		correctly positioned, seek medical attention immediately

Batteries are exhausted. Replace with four new AAA alkaline batteries