OPERATION ________________________________________
Special features
The appliance has a ceramic/stain-
less steel cutting head D . You can adjust the steel blade while
trimming using the lever C . This allows you to finely adjust the trim- ming length.
Trimming hair
1Put on a comb for the cutting grade you need (see the table below).
2
1
2To do this, put the teeth of the cutting head in the central grove of the comb and gently press on the bottom of the blade head until it catches (1 and 2).
3Place a towel around the neck and shoulder of the person whose hair you are trimming. Make sure the person is seated so that their head is roughly at your eye level. Before trimming, comb the hair so that it falls nat- urally and you can see the direc- tion in which it grows.
4Switch on the appliance using the switch A and start trimming.
5Turn off the appliance using the A switch when you have finished trimming.
6Take off the comb. Gently pull the bottom catch away from the cutting head until it comes loose. Then lift off the comb.