CLEANING AND CARE___________________________
Cleaning and care
1Switch off the appliance and unplug it if you are running it from the mains.
2Take off the comb and clean the blades with the brush supplied.
3Only clean the housing and the comb with a damp, soft cloth.
Note
7Never immerse the appliance, lead or mains adapter in water or other liquids.
4Before using the appliance again, dry all parts completely using a towel.
5Do not use cleaning agents.
6Put on the protective cover sup- plied.
Note
7Remove any clippings after each use.
Adjusting the blades
When new, the blades are optimally aligned. However, you need to readjust the blades if you replace them or if you have removed the lower blade for cleaning.
1Loosen the screws.
2Align the teeth of upper blade (ceramic) and the lower blade (stainless steel). The points of the teeth on the upper blade should be roughly 1.2 mm behind those of the lower blade.
3If the blades are not correctly aligned, switch off the appliance, loosen the screws again and readjust the blades.
4Tighten the screws once you have aligned the blades.