USING THE DEVICE
5.Press the power switch. The compressor turns off and nebulization stops.
Power Indicator
6.Disconnect the Air Tube from the Nebulizer
Kit. Hold the Air Plug and gently pull down to disconnect the Air Plug from the Air Tube Connector on the bottom of the nebulizer kit.
7.Check the Air Tube. No condensation or moisture should remain in the Air Tube.
WARNING
Do not store the air tube with moisture or medication remaining in the air tube.This could result in infection as a result of bacteria.
If any condensation or moisture remains in the air tube, remove the moisture from the air tube. Follow the directions below:
1.Make sure the Air Tube is still connected to the Air Connector on the front side of the compressor.
2.Press the power switch on. The compressor will start and pump air through the air tube to expel the moisture.
3.Press the power switch again to turn the compressor off.
8.Disconnect the Air Tube from the compressor. Hold the Air Plug and gently pull the Air Plug off the Air Connector on the front side of the compressor.
9.Unplug the device from the electrical outlet.
CAUTION
Unplug the power cord from the electrical outlet after using the device.
CAUTION
Remove the rechargeable battery and the
AC Adaptor from the device after use.
16