Operating Instructions
1.Rotate the program dial clockwise until the time indicator located on the socket face, matches the current time.
Switching is possible with the long stem of the timer pin only.The inner circle of holes on the timer are for switching on, and the outer circle of holes are for switching off.
2.Place the grey pin with the indicator arrow pointing “INWARD” where the timer is to turn on.Then insert the white pin with the arrow pointing “OUTWARD” where the timer is to turn off.
3.Plug your timer into a regular 230/240 Volt household power point and turn power on.
4.Plug the appliance or lamp into the timer and turn the appliance or lamp on.
5.Be sure the manual override is NOT set on the 
(timer) position.
To override the 
position, this will turn your appliance on.
Shortly after the timer has executed any program, the manual override cannot be moved for approximately 10 minutes.
NOTE: If the power supply to the timer is interrupted, it
is necessary to reset the current time setting.