Pride Mobility Rock 2, Rock 3, Fast manual Remove the calf protector to expose the lower end

Page 29

V . C O M F O R T A D J U S T M E N T S

11.Repeat procedure on opposite side. Chair will not function properly unless springs are identical from side to side.

12.Install the wheels and make sure that the quick release axles are fully engaged.

Extension Limit and Force Adjustment (only Reaction Active Leg Rest)

SPRING

1.

Remove the calf protector to expose the lower end

 

of the knee angle tensioning device.

2.

Slide the triangular plate (near the child’s knee)

 

toward the front of the wheelchair to depress the

 

button on the black ratchet. See figure 41.

3.

Remove the bolt connecting the pivot block to the

SPRING SEAT

NUT

SPACER (OPTIONAL)

 

lower leg rest rigging. See figure 42.

4.

Remove the pivot block and rubber bumper.

5.

Use a 3/4-in. wrench to remove the nut from the

 

spring assembly.

6.

Remove the spring and spring seat.

7.

Change the spring.

8.

Reinstall the spring seat. Install spacers, if desired.

9.

Install the nut. The spring must be compressed

 

slightly to install the nut. Use a 3/4-in. wrench to

 

tighten the nut until it is flush with the end of the

 

tension tube.

10.

Install the rubber bumper over the 0.25-in. (0.64-

 

cm) shaft.

11.

Thread the pivot block onto the 0.25-in. (0.64-cm)

 

shaft. The pivot block does not have to be tight.

 

Make sure that the shaft does not protrude into the

 

0.25-in. (0.64-cm) hole for the bolt. Three to four

 

turns of the pivot block are ideal. Thread-locking

 

glue (such as Loctite) is NOT necessary since this

 

part cannot rotate once installed.

12.

Install the bolt to connect the pivot block to the

 

lower leg rest rigging.

13.

Repeat on other side, if needed.

14.

Reinstall the calf protector to cover the lower pivot

 

point.

WARNING! Make sure calf protector is always installed.

Figure 40. Upper Body Extension Limiter/Tensioner, Exploded View (Kids ROCK 2 and ROCK 3)

BUTTON

TRIANGULAR PLATE

Figure 41. Triangular Plate

TENSION TUBE

SPRING

SPRING SEAT

SPACER (OPTIONAL)

NUT

BUMPER

PIVOT BLOCK

Figure 42. Knee Extension Limiter, Exploded View

Kids UP Series

www.pridemobility.com

29

Image 29
Contents Page Quick Reference Information F E T Y G U I D E L I N E SLanguage Usage IIIN T R O D U C T I O N SafetyPURCHASER’S Agreement Shipping and DeliveryS a F E T Y Product Safety SymbolsModifications Pre-Ride Safety CheckGeneral Guidelines Incline Information Weight LimitationsTire Inflation Public Streets and Roadways Attendant or Manual Wheel LocksCornering Information Outdoor Driving Surfaces Inclement Weather PrecautionsStationary Obstacles Steps, Curbs, etc Stairs and EscalatorsElevators DoorsLift Systems/Elevation Products Motor Vehicle TransportIdeal Transfer Position TransfersAlcohol/Smoking Flammability PrecautionsPrescription Drugs/Physical Limitations Kids Fast I . Y O U R W H E E L C H a I RKids Rock 2 and Rock 3 Wheelchairs Kids Rock 2 and Rock 3 WheelchairAttendant and Manual Wheel Locks Seatback Hip Angle AdjustmentTherapy Tray Optional To unfold the mobility base Mobility Base Kids FastTo fold the mobility base To install the shell assembly Shell Assembly and Mobility Base Kids FastTo remove the shell assembly Guidelines Transit Feature OptionalKids UP Preferred Pelvic Belt Angle A S S E M B L Y Initial Assembly of Your Kids UP Series WheelchairTo unpack the Kids UP Series Wheelchair To assemble the Kids Fast WheelchairTo install and adjust anti-tip wheels Anti-Tip Wheel Installation Kids Rock 2 and Rock„ 7/16-in. nut driver „ 5/32-in. hex wrench Active Handle Lever Installation InstructionsO M F O R T a D J U S T M E N T S Comfort AdjustmentsSeat Depth Adjustment Kids Fast Back Height Adjustment Kids Fast Seat Depth Adjustment Kids Rock 2 and RockLeg Length Adjustment Kids Rock 2 and Rock Back Height Adjustment Kids Rock 2 and RockLeg Length Adjustment Kids Fast Kids Fast Adductors Extension Limit and Force Adjustment Kids Rock 2 and Rock Extension Limit and Force Adjustment Kids FastRemove the calf protector to expose the lower end Tilt-in-Space To adjust the tilt angle of the childSee figures 50 To disable Active Motion To enable Active MotionActive Motion Before enabling the Active Motion, verify the fol LowingInstallation of Positioning Belts Handlebar Angle AdjustmentTo adjust glide rests To install the positioning beltGlide Rest Adjustment Kids Fast To adjust shorter leg rest lengths Short Leg Drop Adjustment Kids FastSunshade Installation Kids Fast Sunshade Installation and Removal Kids FastTemperature Care and MaintenanceC a R E a N D M a I N T E N a N C E General GuidelinesWeekly Checks Cleaning and DisinfectionMonthly Checks Yearly ChecksManual Wheel Locks Wheel ReplacementTo adjust each manual wheel lock Kids Fast Maintenance ChartKids Rock 2 and Rock When to See Your Quantum Rehab Provider for ServiceKids Fast P E N D I X I Specification SKids Rock 2 and Rock