Pride Mobility I NFMANU339 manual Battery Break-in, Frequently Asked Questions FAQs

Page 26

V I . B A T T E R I E S A N D C H A R G I N G

To charge the batteries using the off-board charger:

1.Position the front of your power chair next to a standard electrical outlet.

2. Be certain the controller power is turned off and the free- wheel levers are in the engaged position. See III. “Your Power Chair.”

3. Plug the off-board charger into the off-board charger/ programming socket on the controller. See figure 15.

4. Plug the off-board charger into the electrical outlet.

NOTE: The LED lights on the charger indicate different

 

charger conditions at various times: charger power on,

 

charging in progress, and charging complete. Refer to the

 

manual supplied with the charger for a complete explana-

 

tion of these indicators.

 

5. When the batteries are fully charged, unplug the off-

 

board charger from the electrical outlet and then from the

Figure 15. Battery Charging

controller.

 

Battery Break-in

To break in new batteries for maximum efficiency:

1.Fully recharge any new battery prior to its initial use. This brings the battery up to about 90% of its peak performance level.

2.Operate your power chair throughout the house and yard. Move slowly at first, and do not travel too far until you become accustomed to the controls and break in the batteries.

3.Give the batteries another full charge of 8 to 14 hours and operate your power chair again. The batteries will now perform at over 90% of their potential.

4.After four or five charging cycles, the batteries will top off at 100% charge and last for an extended period.

Frequently Asked Questions (FAQs)

How does the charger work?

The battery charger takes the standard electrical outlet voltage of 120 VAC (alternating current) and converts it to 24 VDC (direct current). The power chair batteries use direct current to run your power chair. When the battery voltage is low, the charger works harder to charge the battery. As the battery voltage approaches full charge, the charger doesn’t work as hard to complete the charging cycle. When the battery is fully charged, the amperage from the charger is nearly at zero. This is how the charger maintains a charge but does not overcharge the battery.

Can I use a different battery charger?

You should use the charger supplied with the power chair. It is the safest, most efficient tool to charge the batteries. We do not recommend using other types of chargers (e.g., an automotive battery charger).

NOTE: Your power chair’s charger will not operate after the batteries have been discharged to nearly zero voltage. If this happens, call your authorized Pride Provider for assistance.

How often must I charge the batteries?

Many factors come into play when deciding how often to charge the batteries. You may use your power chair all day on a daily basis or you may not use it for weeks at a time.

26

www.pridemobility.com

Select Traveller

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Jazzy F E T Y G U I D E L I N E S Quick Reference InformationN T E N T S IIIPURCHASER’S Agreement SafetyN T R O D U C T I O N Shipping and DeliveryProduct Safety Symbols S a F E T YS a F E T Y S a F E T Y S a F E T Y Modifications Pre-Ride Safety CheckGeneral Guidelines Incline Information Weight LimitationsTire Inflation Cornering Information Freewheel ModeBraking Information Stationary Obstacles Steps, Curbs, etc Inclement Weather PrecautionsPublic Streets and Roadways Outdoor Driving Surfaces Elevators Stairs and EscalatorsDoors Lift System/Elevation ProductsPositioning Belts BatteriesTransfers Prescription Drugs/Physical LimitationsAlcohol/Smoking Electromagnetic and Radio Frequency Interference EMI/RFII . Y O U R P O W E R C H a I R Select TravellerSelect Traveller Power Base Electrical ComponentsAnti-Tip Wheels Manual Freewheel LeversTo engage or disengage the drive system Initial Assembly A S S E M B L YSeat Installation MandatoryO M F O R T a D J U S T M E N T S Comfort AdjustmentsSeat Height Adjustment Quick Release FastenersArmrest Height Adjustment Armrest Width AdjustmentArmrest Angle Adjustment Controller PositionTo change the controller position Foot Platform Depth AdjustmentTo adjust the foot platform depth Charging the Batteries B a T T E R I E S a N D C H a R G I N GBatteries and Charging Battery Break-in Frequently Asked Questions FAQsInfrequent Use Why do my new batteries seem weak?Daily Use How can I get maximum range or distance per charge?What about public transportation? How can I ensure maximum battery life?How should I store my power chair and its batteries? What about shipping?Temperature Care and MaintenanceShould your power chair come in contact with water I . C a R E a N D M a I N T E N a N C ETo check the brakes Daily ChecksWeekly Checks Monthly ChecksWheel Replacement Disposal of Your Power ChairCleaning and Disinfection StorageBattery Replacement To replace the wheelYou may need the following to replace your batteries When to See Your Authorized Pride Provider for ServiceCorrective Maintenance To replace the batteriesI I . W a R R a N T Y Service Checks and Warranty Service Implied WarrantiesP E N D I X I Specification S SpecificationsP E N D I X I Specification S T E S Quality Control Jazzy Select Traveller Product Serial #

I NFMANU339 specifications

Pride Mobility is renowned for its commitment to creating mobility solutions that enhance the quality of life for individuals with mobility challenges. One standout product in their lineup is the NFMANU339, a mobility scooter designed to offer users unparalleled mobility, comfort, and convenience.

The NFMANU339 features a sleek, modern design that not only provides aesthetic appeal but also enhances functionality. Built with durable materials, this scooter offers exceptional stability and support for users weighing up to 300 pounds. The robust construction ensures that the scooter can withstand daily use, making it ideal for both indoor and outdoor excursions.

One of the key features of the NFMANU339 is its impressive battery life. Equipped with advanced battery technology, this mobility scooter can cover a range of up to 15 miles on a single charge, allowing users to navigate through various terrains without the worry of running out of power. The scooter also comes with a user-friendly charging system, making it easy to recharge when needed.

The ergonomic design of the NFMANU339 ensures user comfort during rides. The seat is fully adjustable, allowing individuals to find their perfect driving position, while the armrests provide additional support. The scooter is also designed with a tight turning radius, making it easy to maneuver in narrow spaces, such as crowded shopping aisles or tight hallways.

Technologically, the NFMANU339 integrates intuitive controls that are easily accessible and simple to operate. Users can adjust the speed settings and engage in directional control with minimal effort. Additionally, the scooter is equipped with LED lighting for enhanced visibility, ensuring user safety during nighttime excursions.

Safety features are paramount in the design of the NFMANU339. It includes anti-tip technology, allowing it to navigate slopes with confidence, and a full suspension system for a smooth ride over bumpy surfaces. The inclusion of a horn and reflectors further enhances the visibility and audibility of the scooter, ensuring that users are seen and heard while on the move.

In summary, Pride Mobility’s NFMANU339 is a feature-rich mobility scooter that blends durability, comfort, and advanced technology. With its impressive range, ergonomic design, and safety features, it stands out as a dependable solution for individuals seeking an enhanced mobility experience, ultimately promoting independence and an active lifestyle.
Top Page Image Contents