V . C O M F O R T A D J U S T M E N T S
Controller Position
You can move the controller in toward or out away from the armrest, or change the position of the control- ler for either
WARNING! Do not place the controller harness so that it can be pinched in the seat frame or the power base frame.
To extend the controller:
1.Flip up the armrest so it is perpendicular to the floor.
2.Loosen the setscrew on the controller bracket. See figure 12.
3.Slide the controller into or out of the armrest to the desired position.
4.Tighten the setscrew to secure the controller.
To change the controller position:
1.Turn off the power to the controller.
2.Unplug the controller harness from the power base.
3.Cut the wire tie(s) that secure the controller harness to the armrest and seat.
4.Flip up the armrest so it is perpendicular to the floor.
5.Loosen the setscrew on the controller bracket. See figure 12.
6.Slide the controller out of the armrest.
7.Loosen the setscrew in the other armrest.
8.Place the controller in the other armrest.
9.Tighten the setscrew to secure the controller.
10.Route the controller harness along the seat frame and secure with wire ties. See figure 7.
11.Plug the controller connector into the power base.
Foot Platform Height Adjustment
You may be able to adjust the height of the foot plat- form. See figure 13.
To adjust the foot platform height:
1.Remove the hardware that secures the foot platform to the foot platform bracket.
2.Move the foot platform to the desired height.
3.Reinstall the hardware that secures the foot platform to the foot platform bracket and tighten.
SETSCREW
Figure 12. Underside of Armrest
| HARDWARE |
FOOT PLATFORM |
|
BRACKET |
|
HARDWARE | ADJUSTMENT SCREW |
Figure 13. Foot Platform Angle Adjustment
16 | www.pridemobility.com | Jazzy Elite 6 |