Panasonic CW-A121VR manual How to Operate

Page 2

CW-A121VR

7.2.How to Operate

(1) Open the Control Panel Cover.

Fig. 1

(2) Power Supply

Switch off the breaker and set the Main Control Knob to the OFF position before plugging the power plug into an electrical outlet.

Fig. 2

Fig. 3

Fig.4

Fig. 5

(3)Main Control Knob

Set to LOW COOLING or HIGH COOLING and LOW HEATING or HIGH HEATING as desired. (FAN setting operates the fan only.)

Caution: If the Main Control Knob is turned off or changed to a fan setting from a cooling operation setting,WAIT at least 3 minutes before resetting to cooling operation.

(4)Thermostat Control Knob.

If the room temperature is not as desired after a reasonable period, turn the thermostat control knob clockwise to make the room cooler or counter clockwise to make the room warmer.

When the thermostat control knob is set to 10, moisture may freeze onto the evaporator fins and prevent effective cooling. If this happens, turn the main control knob to FAN and the thermostat control knob counter clockwise. This will quickly defrost the evaporator fins so that normal cooling can be resumed.

NOTE: Usually 4-5 is the recommended setting for heating and 6-7 is the recommended setting for cooling.

(5)Air Swing Switch.

(Airflow direction adjustment side-to-side)

To obtain a fix airflow direction, set the Air Swing Switch to “ON” for the vanes to swing from side to side until the desired flow direction is reached, then switch it to “OFF”.

For continuous side-to-side air circulation, set the Air Swing Switch to “ON”.

9

Image 2
Contents Vertical Airflow Direction Vane Operating InstructionsMain Unit Ventilation LeverHow to Operate Preparation for Installation Installation InstructionsChoosing the Installation Location Installation ProcedureCW-A121VR Remove the Front Grille Condensed water drainageNoise Consideration Care and MaintenanceElectric Work Transferring