❑LEVELING THE RANGE

1.Remove the storage drawer, broiler drawer or kick panel.

2.Use a 3/16” open-end or socket wrench to back out both rear leveling legs approximately two turns.

3.Use a 1%” open-end or adjustable wrench to back out the front leveling legs two turns.

4.Install the oven shelves in the oven and position the range where it will be installed.

5.Check for levelness by placing a spirit level or a cup, partially filled with water, on one of the oven racks. E using a spirit level, take two readings—with the level placed diagonally first in one direction and then the other.

6.Adjust the leveling legs until the range is level.

7.After the range is level, slide the range away from the wall so that the Anti-Tip device can be installed.

❑INSTALLING THE ANTI-TIP DEVICE

WARNING:

●Range must be secured with an approved Anti-Tip device.

●Unless properly installed, the range could be tipped by you or a child standing, sitting or leaning on an open door.

●After installing the Anti-Tip device, verify that it is in place by carefully attempting to tilt the range forward.

●This range has been designed to meet all recognized industry tip standards for all normal conditions.

●The use of this device does not preclude tipping of the range when not properly installed.

●If the Anti-Tip device supplied with the range does not fit this application, use the universal Anti-Tip device WB02X7909.

1.Mark the wall where the NGHT EDGE of the range is to be located. Be sure to allow for the countertop overhang if you intend to install the range next to cabinets.

2.hcate the outside edge of the device 2%” toward the center of the range from the marked edge of the range.

3.Using the device as a template, mark the position of the hole for the screw.

4.For wood construction, drill a pilot hole at an angle of 20 degrees from the horizontal. A nail or awl may be used if a drill is not available.

Mount the kti-Tip device with the screw provided.

For cement or concrete construction, you will need a 1/4” x 1X” lag bolt and a 1/2” O.D. sleeve anchor, which are not provided. Drill the recommended size hole for the hardware.

Install the sleeve anchor into the drilled hole and then install the lag bolt through the device. The bolts must be properly tightened as recommended for the hardware,

Back of

Range

5.Slide the range against the wall, and check for proper installation by grasping the front edges of the rear surface unit openings and carefully attempting to tilt the range forward.

WHEN ml HOOKUPS ARE COMPLETE~

WE SURE~L ~NTROLSARE LEFT IN THE OFF POSITION.

-E SURE THE FLOW OF ~MBUSTION AND VENTIUTION NR TO THE RANGE IS UNOBSTRU~ED.

(contin[~ed next page)

43

Page 42 Page 44
Page 43
Image 43
GE JGBP26GEN, JGBP27GEN installation instructions When ml Hookups are COMPLETE~
Page 42 Page 44

JGBP26GEN, JGBP27GEN specifications

The GE JGBP27GEN and JGBP26GEN are two exceptional gas ranges that stand out in the market for their advanced features and user-friendly technologies. Both models cater to home chefs looking for precision in cooking, reliability, and a sturdy design that can withstand the rigors of daily use.

The GE JGBP27GEN features a spacious 5.0 cu. ft. oven capacity, providing ample room for large meals, whether it's a holiday feast or a weeknight dinner. This range is equipped with an extra-large oven window that allows users to monitor their cooking without opening the door, thus maintaining optimal temperatures. The oven also boasts a self-cleaning feature, utilizing high heat to eliminate food residue, making upkeep effortless for busy homeowners.

On the other hand, the JGBP26GEN presents a similar oven capacity but comes with a slightly more simplified design, yet it does not compromise on performance. Both models utilize a powerful 15,000 BTU burner, which ensures rapid heating and efficient cooking. With multiple burners ranging from simmer to high-heat settings, users have the flexibility to prepare a variety of dishes simultaneously.

A standout feature of both the JGBP27GEN and JGBP26GEN is their continuous grates, crafted from durable cast iron. These grates provide a stable cooking surface, allowing cookware to glide easily from burner to burner. This design is particularly advantageous for users who employ multiple pots and pans at once.

In terms of additional technologies, both models come equipped with a precise simmer burner that can maintain low temperatures ideal for delicate sauces and simmering tasks. The ranges also include an integrated electronic ignition system, which offers reliable and efficient ignition without the need for matches or lighters.

For aesthetics, both ranges are available in a classic stainless steel finish that adds a modern touch to any kitchen decor. The controls are conveniently located at the front, ensuring ease of use while cooking.

In summary, the GE JGBP27GEN and JGBP26GEN gas ranges combine modern functionality with user-oriented features, making them suitable choices for any cook. Their spacious ovens, powerful burners, and ease of maintenance speak to the needs of both novice cooks and seasoned chefs, making meal preparation enjoyable and efficient.
Top Page Image Contents